Qucell 4G/LTE Small Cell System Manual Version: 0.0.3
Qucell Confidential 33 2018-08-29
6. CLI
6.1.
Data Model Configuration
You can confirm and change data model parameter. Enter the following command.
-
# idm oam
The numbers after ‘OAM’ means firmware version of your device.
Figure 25-1. ‘idm oam’ Command
Move to the directory where the parameter which you want to change or confirm is located. For
example, if you want to change ‘Device.ManagementServer.Username’ parameter, move to
/Device/ManagementServer/ directory.
You can see the sub-parameters of Device.ManagementServer object using ‘ls’ command.
Figure 25-2. Data Model Value Change using CLI - 1
Enter the ‘set’ command with ‘parameter name’=’value’ as bellow. For example, if you want to
change ‘Username’ into ‘administrator’, enter the following command.
-
OAM 0.x.x.x /> set Username= administrator
You can verify whether set command has applied using ‘ls’ command.
Summary of Contents for SC-220
Page 4: ......
