First steps
First dreams
Quax
®
JOY
01 01 44XX
Berceau avec étagère extractible
Baby cradle with a pull-out shelf
Kinderwieg met uittrekbare legger
Wiege mit ausziehbarem Einlegeboden
www
.quax.eu
17
4. Assembling the cradle
Step 1 :
Use the parts A, B and the8 bolts G
Place the 8 bolts (G) in the provided openings on the upperside and the
middle of the legstructures (B). Insert the sides (A) between the legstruc-
tures and pull the bolts one by one backwards and push them back into the
openings of the sides. Now tighten the bolts slightly.
Step 2 :
Use the parts of step 1, the crossbeams E, 4 cylindrical nuts K and
the 4 bolts J
Insert a crossbeam (E) between the legstructures (B). Push two bolts (J)
through the provided openings of the legs and insert two cylindrical nuts
(K) into the provided holes on the crossbeam. Pull back a bolt and repush
it through the nut and tighten. Pull the other bolt back and repush it through
the other nut and tighten. Repeat this action for the remaining crossbar.
Step 3 :
Use the parts of step 2, the shelf D, both stoppers F and 4 screws H
Push the shelf (D) with the holes for the stoppers pointing downwards on
the guides on the legstructures (B). Place the stoppers on the provided
openings of the shelf, push the screws through the holes on the stoppers
and tighten the screws.
Step 4 :
Use the parts of step 3 and the bottom C
Slide the bottom (C) in the cradle and place it on the provided supports on the sides (A)
Step 5 :
FInally fasten all bolts fi rmly (G - from step 1)