Quax
®
First dreams
First steps
www
.quax.eu
38
INDIGO
54 03 55xx-3D
Commode avec trois tiroirs
Chest of three drawers
Commode met drie laden
Kommode mit drei Schubladen
Step 8
: Use the parts of steps
3
to
6
Push both bottom slats (
EB3
) with their wooden dowels in the drillings and over the connectors of the left side
(
EB2 LH
), tighten the eccentrics and hold the slats. Push both crossbars (
EB4
) with their wooden dowels in the
drillings and over the connectors of the side, tighten the eccentrics and hold the slat. Push the upper slat (
EB5
)
with its wooden dowels in the drillings and over the connectors of the side, tighten the eccentric and hold on.
Now push the right side (
EB2 RH
) with its connectors in the drillings and over the wooden dowels of all slats and
tighten the eccentrics. Put the top (
EB1
) upside down on a clean blanket, push the structure with its wooden
dowels into the holes and over the connectors of the top and tighten the eccentrics.
Step 9
: Use the parts of step
7
, both backs
EB6
, the back profi le
M
and twenty wood screws
K
Place the structure with its front on the blanket. Slide the backs (
EB6
) into the profi le (
M
). Place the backs parallel
to the back of the structure. Check if distance
A = B
. Now fi x the backs on the structure with the wood screws (
K
).
