Quax
®
First dreams
First steps
www
.quax.eu
30
SUNNY
54 01 45xx
Lit convertible 120x60 cm
Convertible bed 120x60 cm
Omvormbaar bed 120x60 cm
Konvertierbar Bett 120x60 cm
Step 3 :
Use the parts of step
2
and four or six bottom supports
E
Push the bottom supports (
E
) with their pin into the provided drillings on the sides (
2
). Make sure that all of the
bottom supports are positioned at the same height, one and the same of the three possible positions (
X
-
Y
or
Z
).
Warning
: just the lower position Z uses six bottoms supports
.
Step 2 :
Use both end panels
1
, both sides
2
of step
1
, four short wood screws
B
, four long wood screws
C
,
the
Allen key
SW4
and four gliders
K
Hold both sides (
2
) with their drillings in front of the openings of a leg frame (
1
). Push four short wood screws (
B
)
into the upper drillings of the side frame and tighten them slightly with the wrench (
SW4
). Push four long wood
screws (
C
) into the lower drillings of the side frame and tighten them slightly. Now position the other leg frame and
repeat the action. Stick two furniture glides (
K
) at the bottom of the head and foot ends.
