Quatro SPH Vac Series, Instruction & Maintenance Manual, Page: 8 / 14

QUATRO
Air Technologies Inc.
8
Replacement Filter Part Numbers
Qty Description Part No. Filter Stage
1 Optional Pre Filter Pad Kit (6 Pack) F069-220 Stage 1
1 Optional Pre Filter Pad Kit (12 Pack) F069-71 Stage 1
1 Optional Knock Out Pad Kit (12 Pack) AG168 Stage 1
1 Optional Knock Out Pad Kit (25 Pack) AG169 Stage 1
1 Dust Filter (6 Pack) F071-BX Stage 2
1 HEPA Filter F074 Stage 3
1 Odour Filter (Most Applications) AG097 Stage 4
1 Odour Filter Refill Kit AG119 Stage 4
1 Gel Repair/Replacement Kit AR020 N/A
1
Filter Gasket (40’ Roll)
H296 N/A
The Quatro System can be equipped with many filter sequences. The filters shown on the above table are the most popular
general filter sequence that work in most applications. Verify the filter(s) in your Quatro System for the correct part numbers
before ordering.
General Filter Maintainence Guide:
Stage Filter Reccomended Filter Change Interval iSeries Control Panel
1 Dust Or KO Pad Every 3 Months None
2 Dust Every 6 Months None
3 HEPA Every 6-18 Months
“Service Filters” Flashing
4 Odour Every 6-18 Months
“Service Filters” ON
7- MOTOR SERVICE & REPLACEMENT
LED Diagnostic Table -
“Service Motor(s)” Alerts
If “Service Filter(s)” alert is ON SOLID the motor(s) need to be serviced or replaced.
MOTOR ACCESS
WARNING: Switch unit off and unplug power cord from wall before servicing the motor(s).
The motor(s) are accessed through the bottom access pane.
REMOVE ALL FILTERS BEFORE TURNING THE UNIT OVER TO ACCESS THE MOTORS.
“Quick Change” Brush Motor “Infinity” Brush Motor
Brushless Motor
Determine which type of motor your system has installed and follow the service or replacement instructions.
ONLY the “Quick Change” Motor Brushes can be replaced in the field (motor brushes can be replaced).
IMPORTANT NOTE FOR UNITS EQUIPPED WITH
“INFINITY” MOTORS:
In cases of heavy production (continuous
hours of daily operation) , the brushes on the INFINITY Motors may wear before the warranty is over.
Please note this is NOT considered a warranty issue. Motor life is a function of hours used and filter maintenance.
They are designed to operate 1500-2000 hours and then replaced.
In some extreme cases motor life can even be less than 1500 hours and this is usually due to the system being run at a
high pressure (dirty filters) for extended periods of time.
Quick Change
Brush
Infinity Curved
Motor Brush
Motor Access
Panel