background image

 

Copyright 

Copyright © 1998 - 2007, Quatech, Inc. All rights are reserved. The 
information contained in this document cannot be reproduced in any form 

without the written consent of Quatech, Inc. Any software programs that 

might accompany this document can be used only in accordance with any 
license agreement(s) between the purchaser and Quatech, Inc. Quatech 

Inc. reserves the right to change this documentation or the product to 
which it refers at any time and without notice. 

Trademarks 

QUATECH® is a registered trademark of Quatech, Inc. Other product 

and brand names listed in this manual may be trademarks of their 
respective owners.  

Disclaimer 

The information in this manual is believed to be accurate and reliable at 

the time of posting. Notwithstanding the foregoing, Quatech assumes no 
responsibility for any damage or loss resulting from the use of this 

manual, and expressly disclaims any liability or damages for loss of data, 

loss of use, and property damage of any kind, direct, incidental or 
consequential, in regard to or arising out of the performance or form of 

the materials presented herein or in any software program(s) that may 

accompany this document. 

 

Changes or modifications to this device not explicitly approved by 

Quatech will void the user's authority to operate this device. 

Feedback 

Quatech, Inc. encourages and appreciates feedback concerning this 

document. Please send any written comments to the Technical Support 

department at the address listed on the cover page of this manual. 

Summary of Contents for SPPXP-100

























Reviews: