May/07
MN2000000068
3
Hardware Installation
1.
Turn Off the power to your computer.
2.
Unplug the power cord and remove your computer’s cover.
3.
Remove the slot bracket from an available PCIe slot.
4.
To install the card, carefully align the card’s bus connector with
the selected PCIe slot on the motherboard. Push the board down
firmly.
5.
Connect the system power source to the board’s power connector.
6.
Replace the slot bracket’s holding screw to secure the card.
7.
Replace the computer cover and reconnect the power cord.
Driver Installation
Please make sure the board is installed before proceeding with driver
installation.
For Windows® 2000
1.
At the
Found New Hardware Wizard
, click
Next
.
2.
Select
Search for a suitable driver for my device
(recommended)
, and click
Next
.
3.
Check
Specify a location
, uncheck the other boxes, then click
Next
.
