May/07
MN
4
General instructions for installing the card are provided below. Since
the design of computer cases and motherboards vary, refer to your
computer’s reference manual for further information, if needed.
1.
Turn OFF the power to your computer.
2.
Unplug the power cord and remove your computer’s cover.
3.
Remove the slot bracket from an available PCI slot.
4.
Carefully align the card to the selected PCI slot, push the board
down firmly, but gently, until it is well seated.
5.
Replace the slot bracket’s holding screw to secure the card.
6.
Replace the computer cover and reconnect the power cord.
Driver Installation
Please make sure the board is installed before proceeding with software
installation.
Windows® 2000/XP/Server 2003/Vista
Windows® 2000, XP, Server 2003 and Vista will automatically detect
and install the correct drivers for the PC Card adapter. Restart
Windows if you’re prompted to do so.
