3
rd
Generation Rack-
Mount RDMS™
12
Quasonix, Inc.
Name
Description
Ethernet (J35)
Enables network access
Power
Supplies AC power to the unit
3.3.2
3U Rear Panel Connections
Rear panel connectors are the same for all receivers; however, in a single-channel configuration all connectors are
not active.
An optional pre-detection diversity combiner is available in the dual-channel receiver configuration. Connectors for
the diversity combiner, EVTM, and TMoIP are present whether the feature is ordered or not. The electrical interface
connectors for all configurations are shown in Figure 7.
Figure 7: Rear Panel
Functional descriptions and electrical characteristics for each clock and data connector for channel 1, channel 2, and
combiner located on the rear panel are described in Table 5.
The RF In ports and the ports located on the right side of the back panel are described in Table 4.
