3
rd
Generation Rack-
Mount RDMS™
142
Quasonix, Inc.
Figure 240: Mod Index Scaling Mode/Hold, Modulation Scale Index with Edit Field
To clear any held modulation scale index number, go to the Main Menu and toggle the Mod Scaling option back to
Tracking. After Mod Scaling is set to Tracking, the modulation index follows the receiver’s present estimate of the
mod index.
4.5.3.5.4 Phase Noise Compensation
The Phase Noise Compensation (PNC) option is used to set the Phase Noise Compensation value to On, Off, or
Auto. Refer to Appendix C in section 9 for detailed information about PNC.
Figure 241: Advanced PCMFM Settings Window, Phase Noise Compensation Drop Down Menu
4.5.3.6
System Settings
The System Settings window, shown in Figure 242, includes the following settings:
•
Antenna Controls
•
Clock/Data Output Controls
•
Test Utilities
Figure 242: System Settings Window
