
Rack-Mount RDMS
TM
Telemetry Receiver
47
Quasonix, Inc.
Figure 81: Options Menu, Load a USB Preset Selection
Insert a USB flash drive into the port on the front panel of the Rack-Mount RDMS™.
A dialog screen displays prompting the operator to enter a number between 0 and 999 using the rack’s front panel
numeric keypad, as shown in Figure 82. When the value is entered, press the Enter key on the keypad.
Figure 82: Load a USB Preset Entry Screen
After successfully entering a preset number and pressing the Enter key, the Options Menu redisplays with one of
two message boxes. If the preset loaded successfully, the box shown in Figure 83 displays. It confirms the location
and the name of the folder on the USB flash drive (memory stick). In this example, it is stored as profile 1. If there is
no flash drive (memory stick) in the USB port on the front panel of the Rack-Mount RDMS™, the message in
Figure 84 displays. Insert the flash drive into the USB port and redo the Save.