Rack-Mount RDMS
TM
Telemetry Receiver
45
Quasonix, Inc.
Figure 74: Options Menu, Rack
Presets Loaded Message
Figure 75: Options Menu, USB Error
Message
4.1.5.5
Save a USB Preset
The Save a USB Preset option allows up to 1000 presets to be saved on a USB flash drive (memory stick). This
option is similar to the Save Rack Presets option but instead of saving 1 through 8 presets directly on the Rack-
Mount RDMS™, this option allows up to 1000 presets to be saved by saving externally to a USB flash drive
(memory stick). To save a single preset to a USB flash drive, select the appropriate option, as shown in Figure 76,
then press the Enter key on the front panel.
Figure 76: Options Menu, Save a USB Preset Selection
Insert a USB flash drive into the port on the front panel of the Rack-Mount RDMS™.
A dialog screen displays prompting the operator to enter a number between 0 and 999 using the rack’s front panel
numeric keypad, as shown in Figure 77. When the new value is entered, press the Enter key on the keypad.
Any number may be used to identify rack preset configurations saved onto a USB flash drive (memory stick). If
more than one configuration is saved, the number does not have to run sequentially, nor does it have to start at 0. For
example, one preset configuration might be saved as 44 and another might be saved as 397.
If the number entered is already in use, the entry screen shown in Figure 78 displays. To overwrite the existing file,
press the Enter key again. If the number was typed in error, press the Escape key on the keypad to cancel the Save.