Quasar Science Rainbow 2, Quick Start Manual

Page: 31 / 185

Output Mode
The RR and R2 lights can operate in 3 Output modes
Normal
High
Low
HO = High Output
LO = Low Output
NO = Normal Output
Normal Output: Normal Operating Temperature, standard light output.
High Output: High Operating Temperature, maximum output. This is the default.
Low Output: Gives maximum resolution in the low dimming section of the light. Maximum power is about 25% of High Output.
NOTE
If you are living in the 0%-25% of the light output when in HIGH OUTPUT MODE, switch to low output to get even better performance.
The Output mode of the fixture can be set several different ways:
• During initial configuration the fixture can be set in any one of the three modes
• Using RDM
• Using Fixture Profiles 31-52 allows for Output mode to be changed dynamically using the last DMX channel of the profile
Rainbow 2
31
English