Linear LED
Q
-
Rainbow RGBX
Main Menu
-
Manual Mode
> Intensity
> Color Temp
> CT Preset
> Saturation
> Hue
> +/- Green
> Color Preset
> Effects
> Config
0 to 100%
2000k to 6000k by 100k increments
3200-4000-5000-5600-6000-2000-2800
0 to 100%
0° to 360°
100M to 0G to 100G
Blue-Cyan-Green-Red-Yellow-Orange-Magenta
Rainbow-Short Circuit-Paparazzi-Fire1-Fire2-Fire3-Coplight1-Coplight2-Demo
DMX Address-DMX Profile-Lead/Follow/Wireless On/Off-StatusLights On/Off
-FirmwareVersion-Lamp Hours-Reset to Default-BACK to Main Menu
Main Menu
-
Manual Mode
> DMX Address
> Profile
> Lead /Follow
> Wireless
> Status Lights
> Firmware
> Lamp Hours
> Reset to Default
001 to 508 (Does not allow address to be outside of 512)
1:HSIC-8 bit, 2:HSIC-16 bit, 3:HSI-8 bit, 4: XFade with CC-8 bit, 5: XFade-8 bit,
-6: CCT & RGB-8 bit, 7: CCT & RGB-16 bit, 8: RGB-8 bit
Lead-Follow1-Follow2-Follow3-Follow4-Follow5
On/Off - Disables the wireless transceiver
On/Off - Turns off the status lights for use on camera
Displays the Firmware Version on the Lamp
Displays the Hours the lamp has been powered on
Sets the lamp back to all its default values
Config Menu
To Set the Intensity, Color Temp, +/- Green, Saturation and Hue:
Press the Left or Right arrows until desired function is selected.
Press Enter to Select.
The selection carrots > < will move from the >Function< to the >Value<
Press the or buttons to set the value. Press Enter to Save.
To Link a Rainbow lamp to a transmitter,
Go to Config->Wireless, Set to ON, Config->Status Lights to ON
If the Wireless DMX is flashing, press and hold the Link button to Unpair.
On the DMX Transmitter, tap the Link button to Pair.
The Wireless DMX Light will start to Flash and turn solid once paired.
-
+
-
+
Getting Started
-
+
DMX
Data
