Q
-
Rainbow RGBX
Linear LED
14 |
P a g e
Modes
The Rainbow can operate in several modes.
•
Manual mode with on screen controls
•
DMX through the Cat5 ports
•
Wireless DMX with on board Lumen Radio chip
•
Lead / Follow Mode for controlling many Rainbows from one.
Mode: Manual Mode
When the Rainbow is running in Manual mode, parameters can be
changed directly on each unit with the on board controls and OLED
screen. No need for a controller to be present.
Mode: Wired DMX
Rainbow has 2 - RJ45 ports for control over 512 DMX. Conventional
DMX 5 pin to RJ45 converters can be used. The pinout of the RJ45 is
Pin 1: DMX +, Pin 2: DMX – Pin 3: Ground.
When the Rainbow is controlled with DMX, the screen displays the
address set in the Config for the Rainbow.
Each Rainbow has a DMX IN port and DMX out port, which allows daisy chaining of Rainbows.
Mode: Wireless DMX
Each Rainbow is equipped with an Lumen Radio Timo chip for
wireless connectivity.
All Rainbows are backwards compatible with W-DMX Transmitters.
For wireless operation, go to Config->Wireless ON
DMX
001
