http://www.quasarelectronics.pl, e-mail: [email protected]
ADDITIONAL ACCESORIES
ADDITIONAL ACCESORIES
W02-LED
harness with green LED
enables indicating actual module status
MPxS-W02-LED-BK
harness with red LED indicating that the trailer fog light is turned on
CONTROLLER FUNCTIONS
CONTROLLER FUNCTIONS
SEQUENTIAL CONTROL OF THE TRAILER FOG LIGHT (54G)
SEQUENTIAL CONTROL OF THE TRAILER FOG LIGHT (54G)
In order to avoid blinding the driver by car’s rear fog light glare reflected by the trailer’s front surface
,
the sequential control of the trailer fog light is applied.
Turning on the trailer fog light:
First turning the car fog light on and off causes the car fog light is turned off while the trailer fog light
is turned on.
Turning off the trailer fog light (54G):
The next turning the car fog light on and off causes both car and trailer fog lights are turned off.
Indication the trailer fog light state with LED:
The LED is used for trailer fog light state indication. The LED should be mounted in the car rear
window vicinity so as to be visible in the central rear-view mirror.
The car fog light (54G)
controlling
Car fog light state
Trailer fog light state
LED
CONNECTING IN CASE OF SINGLE-FILAMENT BULB PERFORMING TWO
CONNECTING IN CASE OF SINGLE-FILAMENT BULB PERFORMING TWO
FUNCTIONS: POSITION AND FOG LIGHT
FUNCTIONS: POSITION AND FOG LIGHT
This function is designed for the cars where the position light and rear fog light are realized on a single
filament bulb (Touran, CADDY, Octavia II, Astra III, Vectra C, Signum...). The position light function is
realized by applying ca. 4V RMS voltage to the bulb. The fog light is realized by applying 12V to the
QUASAR Electronics, ul. Cie lewskich 25k, 03-017 Warszawa
ś
, tel. (22) 427-31-41..44
3 / 7
