Quartzlock A5-8, User Handbook Manual

Page: 6 / 6

Model A5-8 Operation Manual
A5-8 Operating Manual A5 2013 17 July 2013
Page 6 of 6
Specification
1. Input Characteristics:
a. Number of inputs 1
b. Impedance: 50  nominal
c. Level: +8dBm nominal
+7 dBm to +13 dBm adjustable, sine wave
d. Input SWR: <1.3:1 at 10MHz
<2.0:1 at 100MHz
2. Output Characteristics:
a. Number of Outputs 8
b. Impedance: 50  nominal
c. Level: +13 dBm nominal into 50  at 10MHz
d. Output SWR: <1.3:1
e. Maximum Output: 15dBm into 50 ohms at 10MHz typical
3. Frequency Response:
a. 1MHz to 70MHz: ±1.0dB
b. 1MHz to 110MHz: +2.0/-1.0dB
4. Harmonics:
(at rated output,10MHz) (source harmonics less than -60dBc
a.
Second Harmonic <-38dBc
b. Third Harmonic <-48dBc
5. Isolation:
a. Output to Output
i. 10MHz >95dB (adjacent) >110dB (non adjacent)
ii. 100MHz >80dB (adjacent) >90dB (non adjacent)
b. Output to Input >75dB at 10MHz
6. Short Term Stability:(at 10MHz)
a. 1 Sec 2 x 10
-13
tau
b. 10 Sec 2 x 10
-14
tau
c. 100 Sec 5 x 10
-15
tau
7. Phase Noise:
Offset Typical phase Noise, dBc/Hz
a. 1Hz <-140
b. 10Hz <-150
c. 100Hz <-160
d. 1KHz &10KHz <-165
e. 100kHz <-168
8. Noise Floor: <-150
9.
Spurious Outputs:
<-100dBc
10.
Broadband Noise: <-145dBm/Hz
11.
Supply:
85....240V ac