Quark-Elec application note
https://www.quark-elec.com
18 of 23
2015
V1.1
Insert the RF power socket into a powered mains wall socket.
The LED light on the socket should flash at 1 second intervals, indicating it is ready to
pair with QK-W016. If the lights do not flash, press and hold the ON/OFF button for 5
seconds to clear the memory. Cleared memory will be indicated by the LED flashing
quickly.
Open the WiFi remote control panel in the program and press the corresponding RF
switch ‘ON’ button. The pairing command will be sent out via RF signals.
Figure 15 RF switch ON buttons
Once the mains power socket has received the pairing command, the LED light on the
socket will flash briefly more quickly and then flash at 1 second intervals. The RF mains
socket should be successfully paired now.
Repeat the above process for each different RF mains socket.
The RF mains sockets are now ready for remote switching. Due to the nature of the one way
communication protocol between QK-W016 and the sockets, there is no RF mains socket
indicator icon.
6 H
ARDWARE
6.1 Connections
A general view of the module is shown below and details of each connection are also described.
QK-W016 uses 12VDC, 1.0A power and the outside and inner diameters of the mains plug are
5.5 mm and 2.1 mm.