Quark-elec Manual
11 of 22
2019
V4.0
8.1.WiFi Ad-hoc mode
ON THE DEVICE (phone, laptop etc.):
About 15 seconds after the A032 has powered up, a WiFi network with an (SSID) similar to ‘QK-
A032xxxx’ can be found.
Connect the device to ‘
QK-A032xxxx
’ with
the default password: ‘
88888888
’.
IN THE CHART SOFTWARE:
Set the protocol as ‘
TCP
’, IP address as
‘
192.168.1.100’
and the port number as
‘
2000
’ in the chart software.
With the above settings, a wireless connection should be established and the user will be able to
receive the data through the chart software.
Note: In Ad-hoc mode, the IP address should not be changed.
SSID and password can be changed using the configuration software; the password should be
between 8 to 12 characters.
Users can check the wireless connection with TCP/IP port monitoring software as shown below:
Figure 6: TCP/IP Net Assistant
Device SSID
Similar to ‘QK-A032xxxx’
WiFi password
88888888
Protocol
TCP
IP address
192.168.1.100
Data Port
2000
