background image

Quark-elec Manual

https://www.quark-elec.com

9 of 10

2018

V1.0

7. Specification

Item

Specification

Frequency bands

161.975MHz &162.025MHz

Operating temperature

-25°C to +80°C

Storage temperature

-25°C to +85°C

Average supply current (typical

quiescent)

<[email protected]

AIS receiver sensitivity

-105dBm@30%PER

8. Warranty and legal notes

Quark-Elec warrants this product to be free from defects in materials and manufacture for one year

from the date of purchase. Quark-Elec will, at its sole option, repair or replace any components that
fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts

and labour. The customer is, however, responsible for any transportation costs incurred in returning

the unit to Quark-Elec. This warranty does not cover failures due to abuse, misuse, accident or

unauthorized alteration or repairs. A returns number must be given before any unit is sent back for
repair.

The above does not affect the statutory rights of the consumer.

Disclaimer

This product is designed to aid navigation and should be used to augment normal navigational

procedures and practices. It is the user’s responsibility to use this product prudently. Neither Quark-
Elec, nor their distributors or dealers accept responsibility or liability either to the products user or their

estate for any accident, loss, injury or damage whatsoever arising out of the use or of liability to use

this product.

Accuracy of this manual

Quark-Elec products may be upgraded from time to time and future versions may therefore not

correspond exactly with this manual. The manufacturer of this product disclaims any liability for

consequences arising from omissions or inaccuracies in this manual and any other documentation

provided with this product.

9. Additional information and support

For additional technical information and other enquiries

, please go to the Quark-elec

forum at:

https://quark-elec.com/forum/

it’s often the quickest way to receive and answer as

many questions have already been answered there.

For sales and purchasing information, please email us:

[email protected]

Summary of Contents for QK-A021











Reviews: