Monitor System Health
The VS1004-NVR comes with SuperDoctor installed. Use it to monitor the health of your system
and to send notifications via email and SNMP traps.
Information about SuperDoctor is available at:
https://www.supermicro.com/en/solutions/management-software/superdoctor
The SuperDoctor User’s Guide is here:
https://usermanual.wiki/Document/SuperDoctor5UserGuide.2776409798/html#
.
6-68822-01 Rev A
©2020 Quantum Corporation. All rights reserved.
Page 2
*6-68822-01*
Install and Configure the VS1004-NVR Server
Safety Information:
See
Resources > Regulatory > Safety Information
Before beginning the installation and configuration procedure be sure to review the
section
in the
VS1004-NVR Documentation Center
.
A summary of the installation and configuration steps is below. For details, refer to the
section in the
VS1004-NVR Documentation Center
.
Step 1
Choose a Location
Step 2
Unpack the VS1004-NVR
Step 3
Install the VS1004-NVR in a Rack
Step 4
Cable the VS1004-NVR
Step 5
Power On and Configure the VS1004-NVR.
5a: Perform Initial Configuration
5b: Configure SuperDoctor 5 Web (SD5) for the
NVR System
5c: Remote Connect to the NVR System
5d: Configure Video Management Software (VMS)
VS1004-NVR in a Rack
