Quantum ValueLoader DLT VS160, User Manual

Page: 69 / 88

Diagnostics and Troubleshooting
Removing Stuck Cartridges
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 55
9 After removing the cartridges from the desired carriers, reinstall each
carrier on the ValueLoader belt ( figure 17 ).
• Make sure that the rollers on the bottom of the carrier are aligned
in the carrier tracks.
• Make sure that the belt post beneath each carrier is inserted into
the proper ValueLoader belt loop.
Figure 17 Installing
the Carrier
10 Insert the peg on the bottom of the cartridge carrier into the slot in the
belt, then gently turn the cartridge carrier in place to lock it in the belt
(see figure 17 ).
Note: There are unused loops on the belt. The proper belt loops
have an extra bump on the outside of the loop (see
figure 17 ).