Quantum ValueLoader DLT VS160, User Manual

Page: 68 / 88

Diagnostics and Troubleshooting
Removing Stuck Cartridges
54 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
7 Lift the cartridge carrier, with each cartridge you want to remove,
straight up from the ValueLoader. If the cartridge carrier has a pin at
the bottom, you may have to rotate the cartridge carrier, then lift it
straight up from the ValueLoader.
8 On each carrier, carefully pull the cartridge lock lever away from the
carrier, allowing the cartridge to slide out of the carrier, as shown in
figure 16 .
Figure 16 Pull
Cartridge Release
Lever
Note: To remove the carrier directly in front of the Import/
Export slot, gently rotate the carousel counterclockwise by
moving the belt or carriers until the carrier is no longer in
front of the Import/Export slot.
Cartridge carrier
Cartridge lock lever