![background image](http://html1.mh-extra.com/html/quantum/tape-drives-a-series/tape-drives-a-series_user-manual_4065553067.webp)
LTO Cartridge Specifications
Quantum A-Series Tape Drives User’s Guide
51
The MTBF for the tabletop drive power supply is 50,000 hours with the
unit operated at full load and 25°C.
Mean Time to Replace
1
The mean time to replace (MTTR) is the average time required by a
qualified service technician to diagnose a defective drive and to install a
replacement drive. The MTTR for LTO products is less than 0.5 hour (30
minutes).
The Quantum LTO drives are field-replaceable units. If a problem occurs
with a subassembly or component in the drive, you should replace the
entire unit. Return the drive to the factory in its original packaging.
Contact your distributor, dealer, your computer system company or your
Quantum sales representative to arrange the return.
LTO Cartridge Specifications
Environmental
Considerations
1
The basic environmental tolerances for LTO Ultrium cartridges are listed
in
table 23
.
Table 23
Environmental
Tolerances
Note:
The MTBF rating does not represent any particular drive, but
is derived from a large database of test samples. Actual rates
may vary from unit to unit.
Specification
Value
Maximum localized temperature-
permanent tape damage
Greater than 52°C
Operating temperature
10°C to 40°C
Relative humidity
10% to 80% storage,
20% to 80% operating
Wet bulb temperature
26° C max