Quantum Sun StorEdge L25, User Manual

Page: 76 / 192

Chapter 3 Changing the Library Configuration
Changing the Sync Negotiation Setting
60 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
Changing the Sync Negotiation Setting
3
The
Sync Negotiation
option controls whether the library robotics
negotiates synchronous data transfer mode. Normally, this
negotiation is performed by the host.
To enable or disable
Sync Negotiation
:
1
Access the
Configuration
screen (see Accessing the
Configuration Screen on page 53).
2
Press the
Up
or
Down
buttons until
Sync Negotiation
is
highlighted.
3
Press
Select
.
4
Use the
Up
or
Down
buttons to select the desired
Sync
Negotiation
setting. The available settings are
Enabled
and
Disabled
.
5
Press
Select
.
To return to the
Configuration
screen without changing the
option setting, press
Cancel
.
6
Press
Main
to return to the main screen.
Note:
This option does not enable or disable synchronous data
transfers; it only controls the ability of the library to
negotiate for such transfers.
Note:
The default setting is
Enabled
.
Caution:
If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.