Quantum Sun StorEdge L25, User Manual

Page: 49 / 192

Chapter 2 Basic Operations
Using the Mailbox
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide 33
10
Use the
Move
command on the
Mailbox
screen to move the
imported cartridge to another data element.
11
If you removed a data cartridge from the mailbox, replace it:
a
Repeat steps 1 through 4 to open the mailbox again.
b
Reinsert the data cartridge you removed in step 5 into the
mailbox.
c
Reinsert the magazine into the library.
d
Close the magazine access door.
e
On the
Mailbox
screen, press
Re-Lock
.
The magazine access door locks.
Exporting a Cartridge in MAP Mode
2
To export a cartridge in MAP mode:
1
If there is currently a data cartridge in the mailbox, remove it:
a
On the main screen, press
Mailbox
.
The GUI displays the
Mailbox
screen (see figure 22 ).
b
Press
Open
.
The GUI displays the
Mailbox - OPEN
screen (see figure 23 ).
c
Press the white button next to the top left magazine access
door and open the door.
d
Pull the magazine forward until it stops.
e
Remove the data cartridge from the mailbox.
f
Reinsert the magazine into the library.
g
Close the magazine access door.
h
On the
Mailbox - OPEN
screen, press
Re-Lock
.
The library locks the magazine access door and inventories the
mailbox.