Quantum Sun StorEdge L25, User Manual

Page: 116 / 192

Chapter 6 Running the Demonstration Programs
Running the Demo 2 Program
100 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
Running the Demo 2 Program
6
The
Demo 2
program causes the robot to pick a cartridge from the
first occupied magazine slot and place it in the next vacant
magazine slot. The robot then moves to the next occupied slot and
repeats the process.
To run the
Demo 2
program:
1
Verify that at least one magazine is installed in the library and
that at least one cartridge is present.
2
Access the
Demo Programs
screen (see Accessing the Demo
Programs Screen ).
3
Press the
Up
or
Down
buttons to select
Demo 2
.
4
Press
Select
.
The
Demo 2
program starts. This program continues until you
press the
Stop
button.
5
If desired, include the drives or the fixed slot in the test:
a
Press the
Level
button to select the level where the desired
drive or fixed slot is located.
b
Press
Drive 1
or
Drive 2
to include a drive.
c
Press
Fixed
to include the fixed slot.
6
To stop the program, press
Stop
.
The GUI displays a status screen listing the demonstration
program number, the number of cycles completed, and the
status of the test: pass or fail.
7
Press
Back
to return to the
Demo Programs
screen.