Quantum Sun StorEdge L100, User Manual

Page: 103 / 192

Chapter 5 Running Diagnostic Programs
Running the Barcode Scanner Test
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide 87
Running the Barcode Scanner Test
5
The
Barcode Scanner
test causes the bar code scanner to do a
complete inventory of the library, scanning each magazine location
for the presence of a valid bar code label.
To run the
Barcode Scanner
test:
1
Access the
Diagnostics Menu
screen (see Accessing the
Diagnostics Menu Screen ).
2
Press the
Up
and
Down
buttons to select
General
.
3
Press
Select
.
The GUI displays the
Diags: General
screen (see figure 48 ).
Figure 48 Diags:
General Screen
4
Press the
Up
and
Down
buttons to select
Barcode Scanner
.
5
Press
Select
.
The GUI displays the
Diag: Barcode
screen, which prompts you
to set the cycle count (see figure 49 ). The rightmost number is
highlighted.