Quantum Sun StorEdge L100, User Manual

Page: 89 / 192

Chapter 3 Changing the Library Configuration
Changing the Ignore Host Lock Setting
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide 73
Changing the Ignore Host Lock Setting
3
The
Ignore Host Lock
option controls whether the library can
release the mailbox when the host has issued a SCSI command to
lock the media:
• Enabling this option allows you to release the mailbox even
when the host has issued a SCSI command to lock the media.
• Disabling this option causes the library to display an error
message when you try to release the mailbox when the host has
locked the media.
To change the
Ignore Host Lock
setting:
1
Access the
Configuration
screen (see Accessing the
Configuration Screen on page 53).
2
Press the
Up
or
Down
buttons until
Ignore Host Lock
is
highlighted.
3
Press
Select
.
4
Use the
Up
or
Down
buttons to select the desired
Ignore Host
Lock
setting. The available settings are
Enabled
or
Disabled
.
5
Press
Select
.
To return to the
Configuration
screen without changing the
option setting, press
Cancel
.
6
Press
Main
to return to the main screen.
Note:
The default setting is
Disabled
.
Caution:
If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.
Note:
You must reboot the library before this setting will
take effect.