Quantum SPARK 1575, Getting Started Manual, Page: 9 / 90

Setting up the Appliance
Quantum Spark 1575 / 1595 Appliance Getting Started Guide | 9
Setting up the Appliance
1. Remove the Quantum Spark 1575 / 1595Appliance from the shipping carton and place it
on a tabletop.
2. Optional: Remove the transparent protective sticker from the front panel of the
appliance.
3. Attach antennas to the model (WiFi and Cellular model only).
4. Identify the network interface marked as LAN1. This interface is preconfigured with the
IP address 192.168.1.1.
Wall Mounting
To mount the appliance to the wall:
1. Place the wall-mount sticker on the wall and drill two holes for the screws.
2. Insert the 2 screw anchors in the wall.
3. Attach the 2 screws in the accessory kit (M4*6) to the wall.
4. Mount the appliance and verify the 2 screws are fastened well to the appliance.
Key Item Description
1 Holes on the bottom of the appliance Attach screws here