Viewing LEDs on the SAN Card
Quantum Smart-1 6000-L/6000-XL Appliances Replacing SAN Cards | 16
Viewing LEDs on the SAN Card
After the cabling is complete, make sure to see the LEDs on each port.
Self-Test Conditions and Results for the Ports
Green LED
Yellow LED
State
Off
Off
No SFP modules installed or boot failure (dead board)
Off
On
POST failure (dead board)
Off
Slow blink
Boot failure after POST
Off
Flashing
POST processing in progress
On
Off
Failure in common code module
On
On
Failure in common code module
On
2 Fast blinks
Normal (link up at 4GFC)
On
3 Fast blinks
Normal (link up at 8GFC)
On
4 Fast blinks
Normal (link up at 16GFC)
On
5 Fast blinks
Normal (link up at 32GFC)
Slow blink
Off
Normal link down
Fast blink
Fast blink
Beaconing
