![background image](http://html1.mh-extra.com/html/quantum/scalar-ltfs/scalar-ltfs_power-supply-replacement_770636003.webp)
Quantum Scalar LTFS Appliance: Power Supply Replacement
6-68095-01 Rev A
December 2013
Removing a Failed Power Supply
3
Removing a Failed Power Supply
To remove the failed power supply, complete the following steps:
1
Look at the LED indicators on the power supply: when an amber LED is
displayed or the LED is OFF, that power supply has failed (see
Figure
1
).
2
When disconnecting the power cable, remove the cable from the strap.
3
Remove the power supply cable from the failed power supply.
4
Press the release latch and use the power supply handle to help remove the
power supply from the Scalar LTFS Appliance.
Caution:
The power supply may be hot. Use caution when removing the
failed power supply.
Figure 1 Remove the Scalar
LTFS Appliance Power Supply
Connector
Power
Supply
Release
Latch
Power
Supply
Handle
Status LED
(Step 1)
Velcro strap
(Step2)
(Step 4)
I
Replacing a Failed Power Supply
To replace the power supply, complete the following steps:
1
In the empty bay of the Scalar LTFS Appliance, insert the replacement power
supply until the release latch snaps into place.
2
Reattach the power cable to the power supply.