Quantum Scalar i6000, User Manual

Page: 258 / 738

Chapter 3: Configuring Your Library
Configuring Library Security
240 Quantum Scalar i6000 User’s Guide
Configuring Access for
SNMP and SMI-S
The SNMP/SMI-S tab on the Security Configuration dialog box allows
you to enable or prevent SNMP or SMI-S traffic across the MCB Ethernet
port.
1 Click the SNMP/SMI-S tab on the Security Configuration dialog
box.
2 You can change the security settings for any of the following items:
• SMI-S — To allow SMI-S traffic (port 5988), select the Enable
SMI-S check box. To allow encryption of SMI-S traffic (SSL, port
5989), select the Enable Secure SMI-S check box.
Note:
Port 427 is used for Service Location Protocol (SLP),
which is used along with the Common Information
Model (CIM) server.
•
SNMP
— To prevent all SNMP traffic across the MCB Ethernet
port, select
Disable
. To allow SNMP Get operations, select
Enable
.
If SNMP traffic is allowed, then SNMP v3 is always available. If
you want to permit less secure SNMP access, select
Enable
SNMP v1 and v2
. If you decide you do not want to use SNMP
v1 and v2, clear the
Enable SNMP v1 and v2
check box.