Appendix E Firmware Upgrade Instructions for Stacked Libraries
Uploading Library Firmware
Quantum Scalar 50 User’s Guide
228
The
Stack role
screen displays.
4
Use the up and down arrows to select
Stand alone
and press
Enter
.
The system prompts you with a confirmation screen asking
Change to
Standalone and reboot this system?
5
Press
Yes
.
The library shuts down. Continue with
.
Uploading Library Firmware
After the library stack role is set to
Stand alone
, you can upload library
firmware to the cabinet.
To upload library firmware:
1
Connect an Ethernet cable to the left-hand Ethernet port on the
library SCB and to a network host on the same subnet as the library
).
Note:
Make note of the original stack role. You must return the
library to its original stack role after the library firmware
has been updated.
Note:
If this was the
Master
library, there will already be an
Ethernet cable connected to the library SCB.
Summary of Contents for Scalar 50
