Chapter 3 Quantum Scalar 50 Remote Management
Setup
Quantum Scalar 50 User’s Guide
92
To change a drive SCSI ID, the cabinet must be off-line.
3
Click the device (tape drives) to view the drive details.
Native Fibre Channel Tape Drives
3
To configure the Native Fibre channel topology, speed, and loop ID:
1
Click on the
Fibre
link under the
Connectivity
type.
The media changer or tape drive configuration screen displays. Refer
to
for configuration options.
Table 22 Native Fibre Channel
Configuration Options
iSCSI Bridge
3
This section allows users manage the TC2201 iSCSI bridges installed in
the cabinet.
Note:
Changing SCSI IDs or Fibre Channel topology may affect
the operation of your library with other systems. Library
must be rebooted before a new changer SCSI ID or Fibre
Channel configuration will take effect.
Configuration Option
Description
Configured Speed
Select 1 G, 2 G, 4G, or Auto
Negotiate to set the configured
speed
Configured Topology
Select point-to-point, arbitrated
loop, or Auto negotiate to set the
configured topology.
Loop ID
Select the loop ID. The loop ID
can only be set when the
configured topology is set to
arbitrated loop.
Note:
The iSCSI bridge information only displays when a iSCSI
bridge is installed in the library.
Summary of Contents for Scalar 50
