Chapter 8: Electrostatic
Discharge
This chapter contains the following topics:
Grounding Methods to Prevent ESD
About Electrostatic Discharge
To prevent ESD from damaging the system, be aware of the precautions to consider when setting up the
system or handling parts. A discharge of static electricity from a finger or other conductor may damage
system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the
device.
Caution:
Parts can be damaged by ESD. Follow these precautions:
l
Avoid hand contact by transporting and storing products in static-safe containers.
l
Keep electrostatic-sensitive parts in their containers until they arrive at static-protected workstations.
l
Place parts in a static-protected area before removing them from their containers.
l
Avoid touching pins, leads, or circuitry.
l
Always be properly grounded when touching a static-sensitive component or assembly.
l
Remove clutter (plastic, vinyl, foam) from the static-protected workstation.
QX and QXS Setup Guide
196
