![background image](http://html1.mh-extra.com/html/quantum/qx-series/qx-series_getting-started-manual_3503525013.webp)
Contacting Quantum Support
QX and QXS Series Getting Started Guide
13
l
Normally, default profiles are set up at installs.
Table 2 below provides the One Button Configuration for the nine default storage profiles:
Profile
Vdisk
Chunk
size
12-Drive
System
24-Drive
System
48-Drive
System
56-Drive
Systems
StorNext Metadata 1+1
RAID1
N/A
Yes
Yes
Yes
Yes
StorNext Data 10+2
RAID6
256k
Yes
Yes
Yes
Yes
StorNext Data 12+2
RAID6
256k
No
No
No
Yes
StorNext Data 4+2
RAID6
256k
Yes
Yes
Yes
Yes
StorNext Data 5+2
RAID6
256k
Yes
Yes
Yes
Yes
StorNext Data 8+2
RAID6
128k
Yes
Yes
Yes
Yes
StorNext MultiVolume 10+2
RAID6
256k
Yes
Yes
Yes
Yes
StorNext MultiVolume 12+2
RAID6
128k
No
No
No
Yes
StorNext Archive
MultiVolume 10+2
RAID6
128k
Yes
Yes
Yes
Yes
Table 2:
Storage Profiles (Default)
Note:
The QXS system can use the nine pre-defined profiles if the correct number of drives are
installed to support the RAID type.
One-button Configuration Documents
Refer to the following documents and sections for the provisioning process.
l
Disk Management Utility User Guide V3, Using the One Button Configuration section
l
Disk Management Utility User Guide V2, Using the One Button Configuration section
Contacting Quantum Support
More information about this product is available on the Service and Support website at
www.quantum.com/support
.