Quantum QS-550, Operator'S Manual

Page: 27 / 34

Chapter 4 User Maintenance
Model QS-550 - Operator’s Manual
21
OVERVIEW
This chapter is designed to assist the system user in maintaining the smooth opera-
tion of the tubestand. This product has been factory tested to assure its required per-
formance in an x-ray system. The user is responsible for performing routine
maintenance and inspection procedures to ensure proper equipment operation. Aside
from routine maintenance, any abnormal noise, vibration, or unusual performance
should be investigated by a qualified service representative. Preventive maintenance
or any repair service should be performed only by qualified service personnel.
WARNING! Only properly trained service person-
nel should service or maintain this equipment.
Failure to follow manufacturer’s or service per-
sonnel’s recommendations may result in serious
injury. Failure to follow manufacturer’s or service
personnel’s recommendations may result in seri-
ous injury.
USER MAINTENANCE
User maintenance consists of the following activities, which should be performed
on a daily basis:
•
Visually inspect the tubestand for wear and cleanliness
• Clean the exterior painted surfaces of the tubestand
Cleaning
The system user is responsible for the basic cleanliness of the equipment.
Painted metal surfaces should be cleaned using a clean cloth slightly moist-
ened in warm soapy water (use mild soap). Wipe with a clean wet cloth, then
dry. Never use abrasive polish on this equipment.
WARNING! Always disconnect the equipment
from the main power supply prior to any cleaning.