background image

Government law prohibits the operation of unlicensed radio
transmitters. Illegal operation is punishable by fine or imprisonment

Of both.
To avoid problem caused by electromagnetic interference and
electromagnetic compatibility, please turn off the transceiver at
the sites where you are required, such as hospital, airplane etc.

In the vehicle equipped with air bag safety, don't put the transceiver
within the scope of the air bag inflation.

Please turn off the transceiver before step into the inflammable
and explosive places.

Don't transmit for a long time, it may damage the transceiver or
it may cause scald.

Don't use the transceiver which antenna is damaged or else when

the exposed metal touch the skin, it may cause scald also.

Don't expose the transceiver to long periods of direct sunlight,
nor place it close to heating appliances.

If belt the transceiver on with belt clip, please notice that the distance
Between body and antenna should be more than 5cm when
transmitting.
If an abnormal odor or smoke is detected coming from the
transceiver, switch OFF the power immediately and remove the
optional battery pack from the transceiver. Contact our dealer
nearby.

 

NOTICES TO THE USER

We are grateful for you choice of Quantun transceiver.

This Professional two-way radio incorporates the

advanced technology and craft. You will be pleased

with the quality and features of our product. Please

read this manual carefully to ensure you know how

to property operate the radio before use.

THANK YOU

Summary of Contents for QP-650
















Reviews: