4
|
www.qntmnet.com
This Quick Setup Guide provides step-by-step instructions on how to set up Quantum
Networks® Access Point. After completing the steps described in this Guide, you will be able
to install the Access Point (AP) on-site and provide wireless network access to users.
Glossary
Feature
Description
Management Mode
Standalone:
In this mode, each device is configured and
managed individually. It can be useful in scenarios with few
devices or sites with limited Internet access.
RUDDER:
In this mode, devices are configured and managed
from a central controller hosted in the cloud. It offers many
more sets of features as compared to the Standalone mode.
Operation Mode
Bridge:
In this mode, the device connects to a network over an
ethernet cable and extends the coverage over wireless.
Router:
In this mode, the device connects to Internet Service
Provider directly using DHCP / Static IP / PPPoE protocols and
shares Internet access over a wired or wireless network to
users.
Quantum® RUDDER
Quantum® RUDDER
is a cloud-hosted controller which can be
used to configure, manage & monitor devices associated with
it. It can be accessed from
Icon description
Icon on GUI
Description
Click to get the option for the firmware update.
Click to get back to the home page.
Click to check the documentation.
Click to check device information.
