www.qntmnet.com
Management Mode
Quantum Networks’ Access Point can be configured in two modes:
Standalone
Independent management of each Access Point
Cloud Controlled
Centralized management of Access Points using QN-RUDDER
Step 3- Access Point Quick Setup in Standalone Mode
Select “
Management Mode”
as
“Standalone”,
if each Access Point is to be configured
and managed individually.
Define username and password for the device and click
“
Next
”.
User can select Access Point’s Operation Mode as
Bridge
or
Router
.
Description:
Difference between Access Point as a Bridge or a Router.
Bridge
-
In this mode, device connects to a wired or wireless router via an
ethernet cable and extends the wireless coverage of your existing network.
Router -
In this mode, device connects to the internet directly and share internet
access to multiple wired and wireless devices. NAT and DHCP servers are
enabled by default
Bridge
Configure
WLAN
(SSID) parameters and click
Next.
Review the Configuration Summary. Click
Reconfigure
if any changes are
required or click
Finish
to complete the configuration.
Router
Configure
WLAN
(SSID) and
Local subnet
parameters and click
Next
.
Review the Configuration Summary. Click
Reconfigure
if any changes are
required or click
Finish
to complete the configuration.
