background image

9

The iLevel feature is accessed through the controller or a 
single switch, and the power chair must be on a flat, level 
surface to activate iLevel. Once the seating system actuator 
is started, the iLevel boots (

see figure 3

) inhibit movement 

of the front caster arms. The seating system can be reclined 
or tilted up to 20° while the iLevel feature is activated.

NOTE: For more information on the iLevel warning 
displays, refer to the basic operation instructions for 
your controller. 

The iLevel feature should be used only on flat, level, indoor 
surfaces, such as in malls, offices, and/or medical facilities, 
and only on limited, flat, level, hardscape, outdoor surfaces.

While the iLevel feature is in use, the power chair can drive at 
a predetermined, safe speed. Refer to the specifications table 
for more information on reduction of the maximum speed.

The iLevel feature should be used only on flat, level, 

indoor surface, such as in malls, offices, and/or medical 

facilities. Never raise the seat from its lowest position 

on an inclined surface. Failure to heed this warning can 

result in the power chair tipping over.

The iLevel feature is intended for limited outdoor use on 

only flat, level, hardscape surfaces. If you are unsure of 

your environment, do not use iLevel outdoors.

Never raise the seat into iLevel when operating your power 

chair on bumpy or uneven surfaces. Failure to heed this 

warning can result in the power chair tipping over.

Always fasten the positioning belt when operating the 

power chair.

Do not operate the iLevel or change the seat height in 

any way while your power chair is positioned under a 

fixed object, such as a table or desk. Keep area clear 

prior to and during movement.

Never use the iLevel outdoors on uneven terrain (gravel, 

hills or other uneven, non-compact terrain) or in fields.

NOTE: The iLevel feature is equipped with a system that 
allows the power chair to drive at a predetermined, safe 
speed when the seat is elevated. Always check to be 
sure this system is operating properly before using your 
power chair.

NOTE: If a warning or visual indicator appears on your 
controller stating that iLevel is not engaged, the power 
chair's speed will be reduced to 25% when elevated. 
If this warning appears while on level ground, please 
discontinute use of iLevel feature and consult your 
Quantum Rehab Provider for assistance.

WARNING!

PROHIBITED!

YOUR POWER CHAIR

Figure 3. iLevel® Feature

Single Switch

Single Switch

iLevel Boot

(1 of 2 Shown)

iLevel Boot

(1 of 2 Shown)

Summary of Contents for Q6 Edge 3 STRETTO

























Reviews: