9
ENG
Connect the audio signal cables from the RCA outputs of the head unit to the RCA inputs on the device
( 10 )
.
AUDIO SIGNAL CABLES
The HI LEVEL INPUT
( 9 )
is suitable to connect the device input with speaker wires, if your head unit is not equipped with pre-amplifier RCA
outputs. Extend therefor every regarding speaker cable from your head unit with appropriate speaker cables from your car audio retailer
to the mounting location of the amplifier. Then connect the each matching loudspeaker cable with the cables of the included HIGH LEVEL
input jack.
NOTE:
Never use the HI LEVEL INPUT
( 9 )
and the LOW LEVEL INPUT
( 10 )
at the same time. This may damage the device seriously.
HIGH LEVEL INPUT
PROTECTION CIRCUIT
If the POWER LED
( 7 )
lits up, the device is in normal operation. If the PROTECT LED
( 8 )
lits up, the device is overheated. If this occurs, the
internal built-in protection circuit shuts down the device automatically. The device should work again properly after cooling down.
INTERCONNECTION
REMOTE
LOW PASS
BASS BOOST INPUT LEVEL
FUSE
25A
50Hz 150Hz
0dB +18dB
MIN MAX
PHASE
AUTO TURN-ON
POWER
PROTECT
HI LEVEL INPUT
+L
L–
+R
R–
0°
180°
ON
OFF
POWER INPUTS
GND
REM
+12V
LOW LEVEL INPUT
LINE INPUTS
R
L
ACTIVE SUBWOOFER SYSTEM
Q 208A
7
10
9
8
