Chapter 3 Quantum PX720 Remote Management
Setup
Quantum PX720 User’s Guide
146
Table 31 Library Configuration
Table 32 Host Configuration
Field
Description
Power-on Offline
When enabled, the library powers on in the offline
mode.
Online auto
inventory
When enabled, the library performs an inventory
when the library is returned online.
Reset OCP
Password to
Factory Setting
When enabled, the password from the operator
control panel will be reset to the original factory
password which is 001122. Resetting the OCP
password requires a library reboot (master library
only in a CLM configuration).
Enable Quick
Load Port Open
When the
Quick Load Port Open
button is enabled,
the
Ports
button on the OCP is replaced with
OpenPorts
to enable a 1-button push to open all
configured load ports.
Note
: The
Quick Load Port Open
button does not
require system to be offline.
Enable Left
Load Port/Right
Load Port
When enabled, the Left Load Port/Right Load
Port will act as load ports. When disabled, they
will be used as regular slots. Changing the load
port settings causes the library to automatically
reconfigured when you click
Apply
. See
on page 17 for information on
number of load port slots available.
Note:
If partitioning is enabled, the fields in
are available
from the Partitions page. Refer to
on page 149 for
more information on partitioning.
Field
Description
Clean drives
automatically
When enabled, the tape drives will automatically
load a cleaning cartridge and clean the tape drive.
