Quantum PX500 Series, User Manual

Page: 245 / 294

Appendix C Installing the PX502 Library
Installing the Library
Quantum PX500 Series User’s Guide 222
1 Verify that:
• Power cables are firmly in place
• All doors are closed
2 Turn on the power switch located in the lower left-hand corner of the
OCP (see figure 118 ).
Figure 118 Turning On the
Library
During the power up sequence, the library performs an inventory.
The power up sequence can take several minutes.
Setting the Library Options
3
To set the library options:
1 Press Setup from the Home screen. The OCP displays the Setup
screen (see figure 119 ):
Power button
OCP