Appendix C Installing the PX502 Library
Installing the Library
Quantum PX500 Series User’s Guide
212
Installing the Library Chassis
3
1
The back mounting brackets are lettered (A through I so the correct
mounting position is easily determined. The mounting positions
differ depending on the depth of the rack (see
Table 51 Back Mounting
Bracket Orientation
Once the location is determined, attach the back brackets to each side of
the library with four M5 x 8 Allen screws (see
Warning:
The PX502 weighs approximately 65 lbs (29 kg) without
power supplies or tape drives. At least two people are
required to lift and install either library.
Rack Depth
Mounting Position
>27 to 28 in.
Use holes A and C
>28 to 29 in.
Use holes B and D
>29 to 30 in.
Use holes A and C
>30 to 31 in.
Use holes B and D
>31 to 32 in.
Use holes C and E
>32 to 33 in.
Use holes D and F
>33 to 34 in.
Use holes E and G
>34 to 35 in.
Use holes F and H
>35 to 36 in.
Use holes G and I
Note:
Use the shortest depth number. For example, if the
measurement is 34 in., use holes E and G.
