Chapter 3 Quantum PX500 Series Remote Management
Utilities
Quantum PX500 Series User’s Guide
146
Upload Drive Image
3
The upload drive image section allows the user to remotely upload new
tape drive firmware to a specific tape drive within the library.
To upload drive firmware:
1
Select an individual tape drive and number or select an entire cabinet
to update the drive firmware for all tape drives within the library
cabinet.
2
Enter a path and filename where the tape drive firmware exists, or
click
Browse
.
3
Click
Apply
to upload the file.
The firmware image uploads to the tape drive(s) and reboots the
library.
Logs
3
The
Logs
page displays the drive logs for the individual tape drives
within the library and also a failure analysis file.
To access the
Logs
page, from the
Utilities
page, click on the
Logs
tab at
the top of the page.
The
Logs
page displays (see
Figure 98 Logs Page
Note:
The library must be offline to update the drive firmware.