Quantum PX500 Series User Manual Download Page 163

Page: 163 / 294

Chapter 3 Quantum PX500 Series Remote Management

Utilities

Quantum PX500 Series User’s Guide

140

To access the

Library

page, from the

Utilities

page, click on the

Library

tab

at the top of the page.
The

Library

page displays (see

figure 94

Figure 94 Library Page

Online/Offline

The online/offline button allows the user to turn the cabinet online or

offline remotely. The action displayed on the button will depend on the

current state of the library or cabinet. If the library (cabinet) is online,

Offline

button will be displayed. If the library (cabinet) is in the offline

state, an

Online

button will be displayed.

To change the library online/offline:

Click the button to change the library state to online or offline.
The library changes state to online or offline.

Summary of Contents for PX500 Series







































































































































































































































































































Search results

Summary of Contents for PX500 Series

Reviews:

Related manuals for PX500 Series

Brands by name

Popular brands

Quantum PX500 Series, User Manual

Search results

Summary of Contents for PX500 Series

Reviews:

Related manuals for PX500 Series

Brands by name

Popular brands