Quantum PX500 Series, User Manual

Page: 139 / 294

Chapter 3 Quantum PX500 Series Remote Management
Setup
Quantum PX500 Series User’s Guide 116
1 To access the
Network
page, from the
Setup
page, click on the
Network
tab at the top of the page.
The
Network
page displays (see figure 78 ).
Figure 78 Network Page
2
Edit the network information as desired (see table 24 for a description
of the fields).
3
Click
Save
.
The Quantum PX500 Series will not use the new network information
until it has been rebooted (see “Setup” on page 106).