Chapter 3 Quantum PX500 Series Remote Management
Setup
Quantum PX500 Series User’s Guide
113
SCSI/Fibre
3
This section allows the user to set the SCSI IDs for the changer (library)
and every tape drive within the library and also configure any Fibre
Channel tape drives.
1
To access the
SCSI/Fibre
page, from the
Setup
page, click on the
SCSI/
Fibre
tab at the top of the page.
The
SCSI/Fibre
page displays (see
Figure 76 SCSI Page
2
To change a SCSI ID, enter the ID number in the field next to the
device and click
Apply
.
To change a drive SCSI ID, the cabinet must be off-line. To change a
cabinet (changer) SCSI ID, the library must be rebooted before the
new ID takes effect.
3
Click the device (tape drives) to view the drive details.
Native Fibre Channel Tape Drives
3
To configure the Native Fibre channel topology, speed, and loop ID:
1
Click on the
Fibre
link under the
Connectivity
type.
